Shop All

18″/21″ off-road wheelset for the Sur-Ron Ultra Bee, built on genuine EXCEL rims — the stronger option for hard riding and heavy landings. A 21″ front in place of the stock 19″, rear stays 18″. Built to order, colours of your choice.

18″/21″ off-road wheelset built to order for the Sur-Ron Ultra Bee. A 21″ front in place of the stock 19″, rear stays 18″ — full-size enduro geometry, more ground clearance and better roll-over on rough ground. Rim, spoke and hub colours of your choice.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

TORP TM25 motor for the Sur-Ron Light Bee. 13 kW continuous, 27 kW peak at 72 V and 31 kW at 80 V, 67 Nm at 700 A, 10 kg, IP67. Works with TORP TC1000 and TC500 from HW 1.3. 2-year manufacturer warranty.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

Stop harder, lap after lap. Ceramic-compound pads that shrug off heat, kill brake fade and outlast stock — less dust, quieter braking. Fits Sur-Ron Light Bee, 79Bike Falcon/Falcon Pro & E-Ride Pro SS 2.0. Direct bolt-on, shipped fast from the EU.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Professional spoke wrench for Sur-Ron, Talaria and 79Bike wheels. Lets you keep spoke tension even after the first rides — the tool every hand-built wheel needs.

96 CNC aluminium footpegs for the Sur-Ron Ultra Bee. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

v2 CNC aluminium footpegs for Sur-Ron Light Bee and Segway X260. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

sintered brake pads for the Sur-Ron Ultra Bee. Check the table for which compound suits your riding — sintered, semi-metallic and ceramic behave completely differently cold and hot.

Ditch the ugly stock fender. This adjustable tail tidy relocates your plate and rear light into a tight, aggressive tuck for the Sur-Ron Ultra Bee — CNC aluminium, fully adjustable. Taillight not included. Fast EU shipping.

96 Power Parts footpeg mount, CNC-machined from 7075 aluminium, colour black. It replaces the stock part that flexes along with the peg when you ride standing. Anodised, fits the factory mounting points. Fits Sur-Ron Ultra Bee.

Engine guard / bashplate for Sur-Ron Ultra Bee. 5 mm aluminium, powder coated black, with extra ventilation holes for motor cooling. Designed and made by 96 Power Parts. Fast European delivery.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Ultra Bee.

Anodised black aluminium rear wheel spacers for the Sur-Ron Ultra Bee. Made to factory dimensions — the wheel sits centred and the chain line does not move. Aluminium does not rust or seize onto the axle the way the factory steel does.

Stainless steel rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions. Harder than aluminium and equally rust-free — the cheapest route to spacers that still come off the axle in two years.

Front brake disc guard, black, CNC 6061-T6. Sur-Ron Ultra Bee. Protects the disc from rocks and branches. Brake disc and pads not included.

CNC rear brake disc guard for the Sur-Ron Ultra Bee, black. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

96 aluminium rear sprocket, 56T, black — Sur-Ron Ultra Bee. More teeth than the 50T version: stronger acceleration and pull off-road, lower top speed. CNC-machined and anodised.

96 aluminium rear sprocket, 50T, black — Sur-Ron Ultra Bee. Fewer teeth than the 56T version: higher top speed, softer acceleration. The choice for fast, open trails. CNC-machined and anodised.

Reinforced 21″ front OFF-ROAD wheel for Sur-Ron Light Bee, E-Ride Pro SS, Talaria Sting and 79Bike Falcon Pro. Black 21″×1.6″ rim, CNC 7075 hub, 10g stainless spokes. Configured tyre arrives mounted with inner tube. Fast EU shipping.

Strongest, Safest and Most Versatile Smartphone Holder for Motorcycle / Bike / ATV / Scooter

FASTACE ALX13RC 2.0 fork, 60 lbs version. 37 mm stanchions, 200 mm travel, open bath damping, compression and rebound adjustment. Sur-Ron Light Bee X, L1E, Talaria.

OFF-ROAD 16″ rear wheel for Sur-Ron Light Bee, E-Ride Pro SS 2.0/2.5 (up to 2025), Talaria Sting MX3/MX4 and 79Bike Falcon Pro. CNC 7075 hubs, stainless spokes. Configured tyre arrives mounted with inner tube.