96 CNC bridged reinforced bar clamp, 7050 aluminium, black — Sur-Ron Ultra Bee, for 28.6 mm handlebars
96 CNC bridged reinforced bar clamp, 7050 aluminium, black — Sur-Ron Ultra Bee, for 28.6 mm handlebars
- 96 Power Parts bar clamp, CNC-machined from 7050 aluminium, colour black. A bridged design — one tied assembly replaces the two separate stock clamps. For 28.6 mm handlebars. OEM dimensions, so geometry and riding position stay unchanged. Full bolt set in
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
The Ultra Bee comes with two independent bar clamps. Each works on its own, so on a hard landing or in a crash they can twist independently — and the bar ends up sitting crooked relative to the front wheel. That is the moment you stop and straighten things out in the middle of a trail.
This design ties both clamps into one part. The whole assembly works as a unit rather than as two halves. CNC-machined from 7050 aluminium, anodised, full bolt set included.
What you are actually after up front
| What you want | What you need | What changes |
|---|---|---|
| A stiffer front end, same position | This clamp | OEM dimensions — geometry and bar height unchanged |
| A higher handlebar | 96 Direct Mount stem | 55 mm rise (80 mm with the riser), different reach |
| Both | 96 Direct Mount stem | The stem replaces the clamp — you do not fit both |
| Just a different handlebar | Renthal Fatbar or Accel Taper MX | The Ultra Bee stock clamp is 28.6 mm, the bar bolts straight on |
This is not a riser. The dimensions match the factory part, so your riding position stays the same — what you gain is stiffness only. If you are after a higher bar you need the 96 Direct Mount stem, not this. And they are not fitted together: the stem replaces the clamp.
What you get
Bridged design
Both clamps tied into one part. The assembly works as a unit, not as two independent halves.
7050 aluminium, CNC
Machined from billet and anodised. Resistant to corrosion and to whatever the front wheel throws up.
OEM dimensions
Geometry, height and reach unchanged. You fit it and ride exactly as before, only stiffer.
Full bolt set included
Nothing to source separately. Fits the factory mounting points with no modification.
Before you buy
You get the clamp with a full bolt set. The handlebar is a separate item.
Made for 28.6 mm handlebars — the MX fatbar standard that Sur-Ron fits to the Ultra Bee from the factory. 22.2 mm bars will not fit.
It fits the Sur-Ron Ultra Bee only. The Light Bee, Segway X260 and Talaria use a different head tube — there the answer is the 96 Direct Mount stem.
Made for 28.6 mm handlebars — the MX fatbar standard that Sur-Ron fits to the Ultra Bee from the factory. 22.2 mm bars will not fit.
It fits the Sur-Ron Ultra Bee only. The Light Bee, Segway X260 and Talaria use a different head tube — there the answer is the 96 Direct Mount stem.
Specification
| Design | Bridged — both clamps in one part |
| Material | 7050 aluminium, CNC-machined |
| Colour | black |
| Handlebar diameter | 28.6 mm (MX fatbar standard) |
| Geometry | OEM dimensions — position unchanged |
| Included | Full set of mounting bolts |
| Fits | Sur-Ron Ultra Bee |
| Manufacturer | 96 Power Parts — designed and shipped from Poland |
7050 is an alloy from the same group as 7075, used where resistance to cracking under repeated load matters. Which is exactly this case.
Bridged design7050 CNC aluminium28.6 mm barsOEM dimensionsColour blackShips from Poland
Check before you buy
- Model. Sur-Ron Ultra Bee only. For the Light Bee, Segway X260 and Talaria the answer is the 96 Direct Mount stem.
- Your handlebar diameter. It has to be 28.6 mm. The Ultra Bee is that from the factory, but if you previously fitted something narrower, check.
- This does not raise the bar. If you want a higher position, take the stem instead.
- Do not combine it with the stem. The stem replaces the clamp, it does not stack on top of it.
Frequently asked
Does it raise the handlebar?
No. The dimensions match the factory part — you gain stiffness only, the riding position stays the same. For a higher bar, take the 96 Direct Mount stem.
How is it different from stock?
The Ultra Bee comes with two independent clamps. This ties both into one part, so the whole assembly works together and does not twist in halves on a landing or in a crash.
Does it fit the Light Bee or a Talaria?
No. This is an Ultra Bee-only version. On the other models the 96 Direct Mount stem takes over both the stiffening and the rise.
Which handlebar fits?
Any 28.6 mm bar — the MX fatbar standard. We stock the Renthal Fatbar and the Accel Taper MX, both in that size.
Are the bolts included?
Yes, the full set. It fits the factory mounting points with no drilling and no modification.
Can I fit this together with the stem?
No. The Direct Mount stem replaces the bar clamp — you pick one or the other, depending on whether you want stiffness or a higher position.
Complete the front end
A front end that stays where you set it after a landing
Machined in Poland from 7050 aluminium. Ships from the 96 Power Parts warehouse.
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5