96 CNC footpeg lowering kit −25 mm, red – Sur-Ron Light Bee L1E / X / LBX, Segway X260
96 CNC footpeg lowering kit −25 mm, red – Sur-Ron Light Bee L1E / X / LBX, Segway X260
- CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
The stock riding position on this bike is set for average height and short rides. After an hour standing up your knees are bent more than they should be, and your back knows it. These adapters move the pegs 25 mm lower — your legs get room and the centre of gravity drops.
CNC-machined from 6061 aluminium. This is not a steel spacer knocked together in a shed — the adapters have their own geometry and carry the load into the factory mounting points. Bolt-on, no drilling and no welding.
Who this actually changes the ride for
| How you ride | Stock footpegs | With −25 mm lowering |
|---|---|---|
| Standing, more than an hour | Knees sharply bent, quick fatigue | More legroom, less fatigue |
| 180 cm tall and above | Cramped position | Closer to a full-size enduro |
| Fast terrain, ruts | Higher centre of gravity | Lower — steadier handling and braking |
| Rocks, roots, technical climbs | More clearance under the peg | 25 mm less clearance under the peg |
| Mostly seated, on tarmac | No difference | No difference — this is not a purchase for you |
The frame, suspension and battery pack stay at factory height — only the pegs come down. Which also means that in very technical terrain it is 25 mm easier to clip a peg on a rock. If you ride mostly rock gardens, that is a real downside of this modification.
What you get
−25 mm down
Left and right adapters move the pegs lower without touching the frame or the suspension.
Bolt-on in fifteen minutes
Mounting bolts included. No drilling, no welding, no frame modification.
6061 CNC aluminium
Machined from billet. Not cast and not bent sheet — this part carries the rider on every landing.
Colour red
The same kit comes in six colours — match it to the rest of the CNC hardware on your bike.
What is not in the box
The kit contains the lowering adapters — left and right — plus a full set of mounting bolts. Footpegs are not included. You fit your stock pegs or our 96 CNC aluminium pegs onto them. The frame, suspension and kickstand stay stock.
Specification
| Lowering | 25 mm |
| Material | 6061 aluminium, CNC-machined |
| Colour | red |
| Included | Left + right adapter, full set of mounting bolts |
| Not included | Footpegs |
| Fitting | Bolt-on, no frame modification |
| Fits | Sur-Ron Light Bee L1E / X / LBX, Segway X260 |
| Manufacturer | 96 Power Parts — designed and shipped from Poland |
The kit works with stock pegs and with 96 CNC pegs alike. If your stock pegs are already worn down, this is the best moment to replace both at once.
−25 mm6061 CNC aluminiumBolt-on fittingBolts includedColour redShips from Poland
Check before you buy
- Model. This version fits: Sur-Ron Light Bee L1E / X / LBX, Segway X260. Other models have their own version of the kit.
- Your height. Above 180 cm the difference is large. Below roughly 170 cm the stock position is often fine already — do not buy this just in case.
- Where you ride. In rocks and roots, 25 mm less clearance under the peg is a real change. In forest and on trails it makes no difference.
- Condition of your stock pegs. The kit does not include them. If they are worn, add 96 CNC pegs at the same time.
Frequently asked
Does it reduce the ground clearance of the bike?
The frame, suspension and battery pack stay at factory height. Only the pegs come down — by 25 mm. In very technical terrain they are easier to clip; otherwise it makes no difference.
Are footpegs included?
No. The kit contains the left and right adapters plus bolts. You fit your stock pegs or our 96 CNC aluminium pegs.
How long does fitting take?
About fifteen minutes. Bolt-on to the factory mounting points, no drilling and no welding.
Who benefits the most?
Riders from 180 cm upwards and anyone who rides standing for more than an hour. Seated on tarmac you will barely notice it.
Can I combine it with a bar riser?
That is the best combination in the whole ergonomics range: pegs 25 mm lower and the bar 55 mm higher on the 96 Direct Mount stem gives you a standing position like a full-size enduro.
Does it fit a model other than the one listed?
No. Peg mounting points differ between models. Sur-Ron Light Bee L1E / X / LBX, Segway X260 — those only.
Complete the setup
25 mm you feel after the first hour of riding
Machined in Poland from 6061 aluminium. Ships from the 96 Power Parts warehouse.
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5