Shop All

D.I.D ERT3 series racing chain, 520 size, gold outer and inner plates, 102 links. Non O-ring for the lowest possible drag. Supplied open with a clip master link. For Sur-Ron Ultra Bee.

D.I.D ERT3 series racing chain, 520 size, gold outer and inner plates, 102 links. Non O-ring for the lowest possible drag. Supplied open with a clip master link. For Sur-Ron Ultra Bee.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

A black aluminium 96 Power Parts chain guard for the Sur-Ron Light Bee (X and L1e) and Segway X260. It shields the top run of the chain from stones, roots and mud — the things that wear out a chain and sprocket fastest.

96 Power Parts bar clamp, CNC-machined from 7050 aluminium, colour black. A bridged design — one tied assembly replaces the two separate stock clamps. For 28.6 mm handlebars. OEM dimensions, so geometry and riding position stay unchanged. Full bolt set in

Compact 40 × 20 mm TORP display with buttons built into the housing. For TORP TC500 1.X and TC1000 1.X controllers only. Controller and battery data without reaching for your phone. Official TORP distributor.

controller and display harness — TORP TC500 controller and TORP display. Replacement part. Check the table that this really is the right version: harnesses are not universal and connectors differ between models and generations.

TORP thumb throttle for controlling regenerative braking. Sur-Ron Light Bee and Ultra Bee with a TORP controller. The wiring loom is not included. Official TORP distributor.

With this Kit You will get Extra 4mm more space for your rear tire.

96 adjustable kickstand for the Sur-Ron Ultra Bee. CNC aluminium, black anodised, 265–350 mm length adjustment — still fits after you raise the suspension.

TORP TC500 2.X controller kit for Sur-Ron Light Bee / Segway X260. FOC, 350 A battery / 500 A phase, works with the stock BMS and display. On the stock battery ~7–8.5 kW instead of ~4.8 kW. Bluetooth, IP67, 2-year warranty.

Battery management system Bypass kit allows to unlock the full power potential of the stock Sur-Ron battery.

Rear wheel axle made of titanium, lighter, more durable and nicer.

600 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

OFF-ROAD 16″/19″ custom wheelset for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Wide choice of MX tyres and rim colours – more grip and stability than the stock setup.

The 18/21' wheel set is perfect for people who want to increase the grip of their Surron

The 18/21' wheel set is perfect for people who want to increase the grip of their Surron

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

TORP TM25 motor for the Sur-Ron Light Bee. 13 kW continuous, 27 kW peak at 72 V and 31 kW at 80 V, 67 Nm at 700 A, 10 kg, IP67. Works with TORP TC1000 and TC500 from HW 1.3. 2-year manufacturer warranty.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

Stop harder, lap after lap. Ceramic-compound pads that shrug off heat, kill brake fade and outlast stock — less dust, quieter braking. Fits Sur-Ron Light Bee, 79Bike Falcon/Falcon Pro & E-Ride Pro SS 2.0. Direct bolt-on, shipped fast from the EU.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Professional spoke wrench. A must-have tool for every Surron owner.