Reinforcements

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour bronze. Footpegs are not included.

Fastace BDA53RC rear shock with 550 lbs spring and external reservoir. 18 clicks of rebound, 16 of compression, 265 mm eye to eye. Fits Sur-Ron Light Bee X / L1e, Talaria Sting and Segway X260. Does not fit the Ultra Bee.

A set of suspension bolts made to a narrow tolerance for the Sur-Ron Light Bee. Factory bolts vary widely in size — some bikes get tight joints, others have noticeable play from new. This set removes that spread. Rolled threads.

Ditch the weak link in your drivetrain. A Gates high-torque reinforced primary belt for the Sur-Ron Light Bee — stronger than stock, smooth and near-silent, built to survive power upgrades. Direct-fit OEM replacement. Fast EU shipping.

FASTACE ALX13RC 2.0 upside-down front fork, 50 lbs spring, gold. 200 mm travel, 37 mm stanchions, compression and rebound adjusters. Fits the stock Sur-Ron and Talaria headset.

FastAce is the original factory front fork for Talaria Sting and Sur-Ron light bee, THE STRONGEST FORK dedicated to heavy Ebikes

CNC-machined 25 mm spacer for the 96 Direct Mount stem with a built-in light bracket in two positions. Raises the bar from 55 to 80 mm and solves the problem that appears the moment you go direct mount: where to bolt the headlight. Longer stem bolts inclu

Raised 96 Power Parts direct mount stem in gold bronze. CNC machined from 7000 series aluminium. 55 mm rise, 40 mm reach. Fits Sur-Ron Light Bee/LBX, Talaria Sting/XXX, Segway X260, E-Ride Pro, 79Bike Falcon. Built for hard landings.

A black aluminium 96 Power Parts chain guard for the Sur-Ron Light Bee (X and L1e) and Segway X260. It shields the top run of the chain from stones, roots and mud — the things that wear out a chain and sprocket fastest.

96 Power Parts bar clamp, CNC-machined from 7050 aluminium, colour black. A bridged design — one tied assembly replaces the two separate stock clamps. For 28.6 mm handlebars. OEM dimensions, so geometry and riding position stay unchanged. Full bolt set in

96 adjustable kickstand for the Sur-Ron Ultra Bee. CNC aluminium, black anodised, 265–350 mm length adjustment — still fits after you raise the suspension.

Rear wheel axle made of titanium, lighter, more durable and nicer.

600 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

v2 CNC aluminium footpegs for Sur-Ron Light Bee and Segway X260. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

96 Power Parts footpeg mount, CNC-machined from 7075 aluminium, colour black. It replaces the stock part that flexes along with the peg when you ride standing. Anodised, fits the factory mounting points. Fits Sur-Ron Ultra Bee.

Engine guard / bashplate for Sur-Ron Ultra Bee. 5 mm aluminium, powder coated black, with extra ventilation holes for motor cooling. Designed and made by 96 Power Parts. Fast European delivery.

Front brake disc guard, black, CNC 6061-T6. Sur-Ron Ultra Bee. Protects the disc from rocks and branches. Brake disc and pads not included.

CNC rear brake disc guard for the Sur-Ron Ultra Bee, black. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

FASTACE ALX13RC 2.0 fork, 60 lbs version. 37 mm stanchions, 200 mm travel, open bath damping, compression and rebound adjustment. Sur-Ron Light Bee X, L1E, Talaria.

Rear brake disc 200 mm for Sur-Ron Light Bee and E-Ride Pro SS 2.0 — 25% thicker than OEM (2.3 vs 1.9 mm). More heat capacity, consistent braking, far less warping. Direct bolt-on with the stock caliper. Fast EU shipping.

CNC rear brake disc guard for the Sur-Ron Light Bee and Segway X260, black, v1. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Light Bee / Segway X260.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Version with threaded slider mounts. Fits Sur-Ron Light Bee.

96 reinforced footpeg mount with brace, 7075 aluminium, black anodised. Three peg positions and a kickstand hole. Sur-Ron Light Bee, Segway X260.

Aluminium footrest mounting spacer for Sur-Ron Light Bee X/L1E and Segway X260 and 79Bike Falcon Pro. Reinforces and stiffens the peg mounting points and prevents cracking. Bolt-on kit, mounting screws included.

96 aluminium rear sprocket, 60T, black — Sur-Ron Light Bee, Segway X260, 79Bike Falcon PRO/GT. More teeth trade top speed for acceleration and pulling power in technical terrain. CNC-machined and anodised.

CNC 7075-T651 rear sprocket, 54T, black, for Sur-Ron Light Bee/Segway X260. Harder acceleration and easier climbs; also in 58/60/62T, black or gold. Fast EU shipping.

Footpeg lowering kit −25 mm for Sur-Ron Light Bee L1E / X / LBX and Segway X260, black. CNC 6061 aluminium adapters — more leg room and a more natural standing position on long rides.

Reinforced rear suspension triangle for Sur-Ron LBX / L1e — machined from 7075 aluminium, colour as in the product name. Stiffer and stronger than the stock part, direct bolt-on replacement.

An aluminium display guard for the Sur-Ron Light Bee X. It protects the display from impact and at the same time moves it to the centre of the handlebar — away from your hands and away from the spot that hits the ground in a crash.

96 adjustable kickstand, CNC aluminium, black anodised. 265–350 mm length adjustment — still fits after you raise the suspension. Sur-Ron Light Bee / Talaria Sting / 79Bike Falcon PRO & GT / Segway X260.

96 Power Parts reinforced rear suspension linkage machined from 7075 aluminium, bearings included. It replaces the stock part that is the first weak link in the rear suspension once you start jumping. Fits Sur-Ron Light Bee / Segway X260.

A CNC-machined, black anodised reinforcement for the upper steerer tube of the Sur-Ron Light Bee and Segway X260. It spreads the load at the point where the frame cracks most often — after a season of jumps and hard landings.