Spare Parts

600 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

Stop harder, lap after lap. Ceramic-compound pads that shrug off heat, kill brake fade and outlast stock — less dust, quieter braking. Fits Sur-Ron Light Bee, 79Bike Falcon/Falcon Pro & E-Ride Pro SS 2.0. Direct bolt-on, shipped fast from the EU.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

sintered brake pads for the Sur-Ron Ultra Bee. Check the table for which compound suits your riding — sintered, semi-metallic and ceramic behave completely differently cold and hot.

Stainless steel rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions. Harder than aluminium and equally rust-free — the cheapest route to spacers that still come off the axle in two years.

FASTACE ALX13RC 2.0 fork, 60 lbs version. 37 mm stanchions, 200 mm travel, open bath damping, compression and rebound adjustment. Sur-Ron Light Bee X, L1E, Talaria.

Rear brake disc 200 mm for Sur-Ron Light Bee and E-Ride Pro SS 2.0 — 25% thicker than OEM (2.3 vs 1.9 mm). More heat capacity, consistent braking, far less warping. Direct bolt-on with the stock caliper. Fast EU shipping.

Complete steering head bearing set for the Sur-Ron Light Bee — LBX, LBS and L1E — and the Segway X260. Upper and lower in one kit. A wear item: replace it when fitting a fork or when the bars feel loose.

96 Power Parts reinforced rear suspension linkage machined from 7075 aluminium, bearings included. It replaces the stock part that is the first weak link in the rear suspension once you start jumping. Fits Sur-Ron Light Bee / Segway X260.

96 Direct Mount stem for Sur-Ron Light Bee, Talaria Sting, Segway X260, E-Ride Pro and RFLOXA Hawk31 PRO/MAX forks. 7000-series CNC aluminium, 55 mm rise (80 mm with riser), 40 mm reach, black. Mounting bolts included.

Upper rear fender in a carbon look finish, for the Sur-Ron Light Bee. It covers the area under the seat and the pack from above. OEM quality, mounting bolts included, fits the factory points with no modification.

Lower rear fender in a carbon look finish, for the Sur-Ron Light Bee / Segway X260. It protects the shock and its shaft from mud and grit. OEM quality, mounting bolts included, fits the factory points with no modification.

A steel 14T front sprocket for the Sur-Ron Light Bee and Segway X260. Factory size — a service part, not a gearing change. The steel is harder than the original material, so the teeth hold their shape for longer.

CNC adjustable brake levers (pair, black) for Sur-Ron Light Bee/X & Segway X260. Fold-away crash design, reach adjustment, aircraft aluminium. Fast EU shipping.

Extended Super Flex rear fender in a gloss black finish, for the Sur-Ron Light Bee / Segway X260. It protects your back — the stock one is too short and water off the rear wheel lands on your jacket anyway. OEM quality, mounting bolts included, fits the f

550 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

A set of two anodised black aluminium front wheel spacers for the Sur-Ron Light Bee, Talaria Sting and Segway X260. Factory dimensions, both sides of the hub in one item.

A black-finish rear axle nut for the Sur-Ron Light Bee, Talaria Sting and Segway X260. Sharp, undamaged corners — the spanner seats properly and does not slip when you break it loose.

Throttle grip replacement for Sur-Ron with aluminum housing.

Anodised black aluminium rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions — the wheel sits centred and the chain line does not move. Aluminium does not rust or seize onto the axle the way the factory steel does.