Sur-Ron Light Bee 2018–2025

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

TORP TM25 motor for the Sur-Ron Light Bee. 13 kW continuous, 27 kW peak at 72 V and 31 kW at 80 V, 67 Nm at 700 A, 10 kg, IP67. Works with TORP TC1000 and TC500 from HW 1.3. 2-year manufacturer warranty.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

OFF-ROAD 16″/19″ custom wheelset for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Wide choice of MX tyres and rim colours – more grip and stability than the stock setup.

600 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

Rear wheel axle made of titanium, lighter, more durable and nicer.

Battery management system Bypass kit allows to unlock the full power potential of the stock Sur-Ron battery.

TORP TC500 2.X controller kit for Sur-Ron Light Bee / Segway X260. FOC, 350 A battery / 500 A phase, works with the stock BMS and display. On the stock battery ~7–8.5 kW instead of ~4.8 kW. Bluetooth, IP67, 2-year warranty.

With this Kit You will get Extra 4mm more space for your rear tire.

TORP thumb throttle for controlling regenerative braking. Sur-Ron Light Bee and Ultra Bee with a TORP controller. The wiring loom is not included. Official TORP distributor.

controller and display harness — TORP TC500 controller and TORP display. Replacement part. Check the table that this really is the right version: harnesses are not universal and connectors differ between models and generations.

Compact 40 × 20 mm TORP display with buttons built into the housing. For TORP TC500 1.X and TC1000 1.X controllers only. Controller and battery data without reaching for your phone. Official TORP distributor.

A black aluminium 96 Power Parts chain guard for the Sur-Ron Light Bee (X and L1e) and Segway X260. It shields the top run of the chain from stones, roots and mud — the things that wear out a chain and sprocket fastest.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

Gold D.I.D 420NZ3G-B chain, 106 links, without O-rings. SDH-treated pins, quad-riveted. Supplied open with a clip master link. Sur-Ron Light Bee.

High Accel Taper MX handlebar in 7075-T6 aluminium, colour black. 28.6 mm clamping area, 790 mm wide, 101 mm high. Bolts straight onto the Sur-Ron Ultra Bee. For the Light Bee, Segway X260, Talaria and E-Ride you need the 96 Direct Mount stem for 28.6 mm

High Accel Taper MX handlebar in 7075-T6 aluminium, colour black. 28.6 mm clamping area, 790 mm wide, 101 mm high. Bolts straight onto the Sur-Ron Ultra Bee. For the Light Bee, Segway X260, Talaria and E-Ride you need the 96 Direct Mount stem for 28.6 mm

Renthal Fatbar MX in the RC High bend, colour blue. 7010-T6 aluminium, unbraced, 28.6 mm clamping area, 22.2 mm grip area. Width 802 mm, rise 84 mm, sweep 56 mm. Bolts straight onto the Ultra Bee. For the Light Bee, Segway X260, Talaria and E-Ride you nee

Renthal Fatbar MX in the RC High bend, colour blue. 7010-T6 aluminium, unbraced, 28.6 mm clamping area, 22.2 mm grip area. Width 802 mm, rise 84 mm, sweep 56 mm. Bolts straight onto the Ultra Bee. For the Light Bee, Segway X260, Talaria and E-Ride you nee