Shop by Bike

v2 CNC aluminium footpegs for Sur-Ron Light Bee and Segway X260. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

96 CNC aluminium footpegs for the Sur-Ron Ultra Bee. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

Stop harder, lap after lap. Ceramic-compound pads that shrug off heat, kill brake fade and outlast stock — less dust, quieter braking. Fits Sur-Ron Light Bee, 79Bike Falcon/Falcon Pro & E-Ride Pro SS 2.0. Direct bolt-on, shipped fast from the EU.

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

TORP TM25 motor for the Sur-Ron Light Bee. 13 kW continuous, 27 kW peak at 72 V and 31 kW at 80 V, 67 Nm at 700 A, 10 kg, IP67. Works with TORP TC1000 and TC500 from HW 1.3. 2-year manufacturer warranty.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

The 18/21' wheel set is perfect for people who want to increase the grip of their Surron

The 18/21' wheel set is perfect for people who want to increase the grip of their Surron

OFF-ROAD 16″/19″ custom wheelset for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Wide choice of MX tyres and rim colours – more grip and stability than the stock setup.

600 lbs spring for the DNM RCP2S 265 mm shock, Sur-Ron Light Bee / Segway X260. The standard spring is 450 lbs — this one is clearly stiffer. Fits the original shock, no shock replacement needed. A spring changes stiffness, not damping.

Rear wheel axle made of titanium, lighter, more durable and nicer.

Battery management system Bypass kit allows to unlock the full power potential of the stock Sur-Ron battery.