Shop by Bike

Aluminium footrest mounting spacer for Sur-Ron Light Bee X/L1E and Segway X260 and 79Bike Falcon Pro. Reinforces and stiffens the peg mounting points and prevents cracking. Bolt-on kit, mounting screws included.

96 reinforced footpeg mount with brace, 7075 aluminium, black anodised. Three peg positions and a kickstand hole. Sur-Ron Light Bee, Segway X260.

17″ supermoto wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Lower centre of gravity and sharper turn-in on tarmac than the stock off-road setup.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Version with threaded slider mounts. Fits Sur-Ron Light Bee.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Light Bee / Segway X260.

18″/21″ off-road wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Full-size enduro geometry — more ground clearance and far more stability at speed than the stock wheels.

CNC rear brake disc guard for the Sur-Ron Light Bee and Segway X260, black, v1. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

Rear brake disc 200 mm for Sur-Ron Light Bee and E-Ride Pro SS 2.0 — 25% thicker than OEM (2.3 vs 1.9 mm). More heat capacity, consistent braking, far less warping. Direct bolt-on with the stock caliper. Fast EU shipping.

12″ supermoto wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. The smallest setup we build — lowest centre of gravity and the fastest steering, made for stunt and tight tarmac.

Custom 16″ OFF-ROAD rear wheel — pick rim, spoke, nipple and hub colours. Sur-Ron LBX/L1E, Talaria Sting MX3/MX4 (adapter included), 79Bike Falcon Pro, E-Ride Pro SS 2.0. Configured tyre arrives mounted with inner tube.

OFF-ROAD 16″ rear wheel for Sur-Ron Light Bee, E-Ride Pro SS 2.0/2.5 (up to 2025), Talaria Sting MX3/MX4 and 79Bike Falcon Pro. CNC 7075 hubs, stainless spokes. Configured tyre arrives mounted with inner tube.

FASTACE ALX13RC 2.0 fork, 60 lbs version. 37 mm stanchions, 200 mm travel, open bath damping, compression and rebound adjustment. Sur-Ron Light Bee X, L1E, Talaria.

Reinforced 21″ front OFF-ROAD wheel for Sur-Ron Light Bee, E-Ride Pro SS, Talaria Sting and 79Bike Falcon Pro. Black 21″×1.6″ rim, CNC 7075 hub, 10g stainless spokes. Configured tyre arrives mounted with inner tube. Fast EU shipping.

96 aluminium rear sprocket, 50T, black — Sur-Ron Ultra Bee. Fewer teeth than the 56T version: higher top speed, softer acceleration. The choice for fast, open trails. CNC-machined and anodised.

96 aluminium rear sprocket, 56T, black — Sur-Ron Ultra Bee. More teeth than the 50T version: stronger acceleration and pull off-road, lower top speed. CNC-machined and anodised.

CNC rear brake disc guard for the Sur-Ron Ultra Bee, black. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

Front brake disc guard, black, CNC 6061-T6. Sur-Ron Ultra Bee. Protects the disc from rocks and branches. Brake disc and pads not included.

Stainless steel rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions. Harder than aluminium and equally rust-free — the cheapest route to spacers that still come off the axle in two years.

Anodised black aluminium rear wheel spacers for the Sur-Ron Ultra Bee. Made to factory dimensions — the wheel sits centred and the chain line does not move. Aluminium does not rust or seize onto the axle the way the factory steel does.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Ultra Bee.

Engine guard / bashplate for Sur-Ron Ultra Bee. 5 mm aluminium, powder coated black, with extra ventilation holes for motor cooling. Designed and made by 96 Power Parts. Fast European delivery.

96 Power Parts footpeg mount, CNC-machined from 7075 aluminium, colour black. It replaces the stock part that flexes along with the peg when you ride standing. Anodised, fits the factory mounting points. Fits Sur-Ron Ultra Bee.

Ditch the ugly stock fender. This adjustable tail tidy relocates your plate and rear light into a tight, aggressive tuck for the Sur-Ron Ultra Bee — CNC aluminium, fully adjustable. Taillight not included. Fast EU shipping.

sintered brake pads for the Sur-Ron Ultra Bee. Check the table for which compound suits your riding — sintered, semi-metallic and ceramic behave completely differently cold and hot.