Sur-Ron Light Bee X / L1E 2026 (10 kW)

Rear wheel axle made of titanium, lighter, more durable and nicer.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

A set of titanium chain adjuster bolts for the Sur-Ron Light Bee. Burnt-blue anodised, rolled threads. Titanium does not rust or corrode the way steel bolts do — chain adjustment stops being a fight with a seized bolt.

battery cover pin set — Sur-Ron Light Bee / Segway X260. Part of the battery bay area: you protect it, close it properly or use it as storage. Check the table for which of the three solves your problem.

A set of two swingarm bushings for the Sur-Ron Light Bee. A wear part — and the usual cause of play at the back of the bike, long before the shock or the bearings are to blame.

A headlight bracket for the Sur-Ron Light Bee X. A service part and a mounting point — the cheapest way to put the light back where it belongs after a crash.

A set of five titanium M8×19 mm bolts for the Sur-Ron Light Bee rear sprocket. Burnt-blue anodised, rolled threads, dual drive Torx T40 and 10 mm hex. Titanium does not rust or corrode the way steel bolts do.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

v2 CNC aluminium footpegs for Sur-Ron Light Bee and Segway X260. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

Stainless steel rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions. Harder than aluminium and equally rust-free — the cheapest route to spacers that still come off the axle in two years.

OFF-ROAD 16″ rear wheel for Sur-Ron Light Bee, E-Ride Pro SS 2.0/2.5 (up to 2025), Talaria Sting MX3/MX4 and 79Bike Falcon Pro. CNC 7075 hubs, stainless spokes. Configured tyre arrives mounted with inner tube.

Custom 16″ OFF-ROAD rear wheel — pick rim, spoke, nipple and hub colours. Sur-Ron LBX/L1E, Talaria Sting MX3/MX4 (adapter included), 79Bike Falcon Pro, E-Ride Pro SS 2.0. Configured tyre arrives mounted with inner tube.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Light Bee / Segway X260.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Version with threaded slider mounts. Fits Sur-Ron Light Bee.

96 reinforced footpeg mount with brace, 7075 aluminium, black anodised. Three peg positions and a kickstand hole. Sur-Ron Light Bee, Segway X260.

Aluminium footrest mounting spacer for Sur-Ron Light Bee X/L1E and Segway X260 and 79Bike Falcon Pro. Reinforces and stiffens the peg mounting points and prevents cracking. Bolt-on kit, mounting screws included.

96 aluminium rear sprocket, 60T, black — Sur-Ron Light Bee, Segway X260, 79Bike Falcon PRO/GT. More teeth trade top speed for acceleration and pulling power in technical terrain. CNC-machined and anodised.

CNC 7075-T651 rear sprocket, 54T, black, for Sur-Ron Light Bee/Segway X260. Harder acceleration and easier climbs; also in 58/60/62T, black or gold. Fast EU shipping.

Footpeg lowering kit −25 mm for Sur-Ron Light Bee L1E / X / LBX and Segway X260, black. CNC 6061 aluminium adapters — more leg room and a more natural standing position on long rides.

Reinforced rear suspension triangle for Sur-Ron LBX / L1e — machined from 7075 aluminium, colour as in the product name. Stiffer and stronger than the stock part, direct bolt-on replacement.

An aluminium display guard for the Sur-Ron Light Bee X. It protects the display from impact and at the same time moves it to the centre of the handlebar — away from your hands and away from the spot that hits the ground in a crash.

96 adjustable kickstand, CNC aluminium, black anodised. 265–350 mm length adjustment — still fits after you raise the suspension. Sur-Ron Light Bee / Talaria Sting / 79Bike Falcon PRO & GT / Segway X260.

Complete steering head bearing set for the Sur-Ron Light Bee — LBX, LBS and L1E — and the Segway X260. Upper and lower in one kit. A wear item: replace it when fitting a fork or when the bars feel loose.

96 Power Parts reinforced rear suspension linkage machined from 7075 aluminium, bearings included. It replaces the stock part that is the first weak link in the rear suspension once you start jumping. Fits Sur-Ron Light Bee / Segway X260.

A CNC-machined, black anodised reinforcement for the upper steerer tube of the Sur-Ron Light Bee and Segway X260. It spreads the load at the point where the frame cracks most often — after a season of jumps and hard landings.

96 Direct Mount stem for Sur-Ron Light Bee, Talaria Sting, Segway X260, E-Ride Pro and RFLOXA Hawk31 PRO/MAX forks. 7000-series CNC aluminium, 55 mm rise (80 mm with riser), 40 mm reach, black. Mounting bolts included.

96 Power Parts footpeg mount, CNC-machined from 7075 aluminium, colour black. It replaces the stock part that flexes along with the peg when you ride standing. Three peg positioning holes and a separate hole for the side stand. Anodised, fits the factory

Upper rear fender in a carbon look finish, for the Sur-Ron Light Bee. It covers the area under the seat and the pack from above. OEM quality, mounting bolts included, fits the factory points with no modification.

Lower rear fender in a carbon look finish, for the Sur-Ron Light Bee / Segway X260. It protects the shock and its shaft from mud and grit. OEM quality, mounting bolts included, fits the factory points with no modification.