Head tube reinforcement, CNC, black — Sur-Ron Light Bee / Segway X260
Head tube reinforcement, CNC, black — Sur-Ron Light Bee / Segway X260
- A CNC-machined, black anodised reinforcement for the upper steerer tube of the Sur-Ron Light Bee and Segway X260. It spreads the load at the upper head tube, where the fork load concentrates on jumps and hard landings.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
Head tube deformation is one of the most expensive failures a Sur-Ron can suffer, because you do not fix it with a part — you fix it with a welder or a new frame. It does not come from nowhere: on every hard landing the load from the fork goes into the upper edge of the head tube. This part spreads that load over a larger area so the head tube does not stretch out of shape.
A few parts on a Sur-Ron wear fastest under hard riding: the front sprocket after a few thousand kilometres, the swingarm bushings, and the steerer tube takes the highest loads when you jump. These are not random breakdowns — they are the places where the design works hardest. What the parts in this group have in common: they cost tens of euros and close a problem that costs many times that to repair after the fact.
Which part closes which problem
| Part | Fits | Problem it closes |
|---|---|---|
| Head tube reinforcement, CNC | Light Bee / Segway X260 | Head tube deforming under jumps |
| Front sprocket 14T, steel | Light Bee / Segway X260 | Worn front sprocket |
| Swingarm bushing set, 2 pcs | Sur-Ron Light Bee | Play in the swingarm |
| Rear wheel adapter | Talaria Sting MX3 / MX4 | Fitting a Sur-Ron Light Bee X wheel to a Talaria |
| Headlight bracket | Sur-Ron Light Bee X | Mounting the front light |
Let us be straight: this does not turn a Sur-Ron frame into a race frame. It reinforces one specific point — the upper head tube, where the fork load is concentrated. If the head tube is already deformed, this part will not repair it. That is a job for a welder.
What you get
Closes the most expensive failure
A damaged frame means welding or replacement. This part costs a fraction of either.
Spreads the load from the fork
The load from a hard landing travels across a larger area instead of concentrating on the edge of the tube.
CNC-machined
Repeatable dimensions and a tight fit against the tube. A part that does not sit flush does not carry load.
Anodised finish
Corrosion-resistant — it sits exactly where the front wheel throws water.
Before you buy
This item fits the Sur-Ron Light Bee and Segway X260. It mounts to the factory points — no drilling and no welding.
This item is the reinforcement with its bolts.
When to do it. Before the jumping season, not after it. This is the one item in this group you fit before the symptom appears — because the symptom is already a damaged frame.
This item is the reinforcement with its bolts.
When to do it. Before the jumping season, not after it. This is the one item in this group you fit before the symptom appears — because the symptom is already a damaged frame.
Specification
| Part | Head tube reinforcement, CNC, black |
| Material | CNC-machined aluminium |
| Job | Reinforcing the upper steerer tube |
| Finish | Black anodised |
| Fits | Light Bee / Segway X260 |
| Manufacturer | 96 Power Parts |
Parts in this group are cheapest to fit preventively — after a failure the repair costs many times the price of the part itself.
Protects the frameCNC-machined aluminiumFit it preventivelyLight Bee / Segway X260
Check before you buy
- Model. Light Bee and Segway X260. Mounts to the factory points.
- Is the frame still sound. This part is there to prevent damage. If the head tube is already deformed, it will not repair it — that needs a welder or a new frame.
- How you ride. It earns its place with jumps, drops and hard landings. For flat riding it is money without a return.
- Fitting. An hour in the garage. A few bolts and a hex key, no welding and no drilling.
Frequently asked
Are these original parts or aftermarket?
These are 96 Power Parts items, made to the factory dimensions and mounting points. They are not Sur-Ron OEM; in several cases they are stronger than OEM, because they exist precisely where the original turned out to be the weak point.
Does fitting need a workshop?
The head tube reinforcement, the headlight bracket and the sprocket are an hour in the garage. The swingarm bushings and the wheel adapter mean taking the assembly apart — if you have never done it, hand it to a workshop. A bad job in those two places costs more than the labour.
When is the best time to fit it?
During other service on the same assembly. If the wheel, swingarm or handlebar is coming off anyway, you add one part instead of paying twice for the same job.
Does this add power or performance?
No. Nothing in this group adds power or changes gearing. These are parts that keep the bike in one piece — a completely different category from tuning.
How do I know whether I need it?
Every card in this group names a specific symptom. If you do not have the symptom, do not buy the part — with one exception: the head tube reinforcement goes on before the head tube takes damage, because afterwards it is too late.
Do it in one teardown
Do it before the jumping season
Ships from the 96 Power Parts warehouse.
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5