TORP monochrome display – Sur-Ron / Talaria, TC500 and TC1000 generation 1.X controllers

TORP monochrome display – Sur-Ron / Talaria, TC500 and TC1000 generation 1.X controllers

Compact 40 × 20 mm TORP display with buttons built into the housing. For TORP TC500 1.X and TC1000 1.X controllers only. Controller and battery data without reaching for your phone. Official TORP distributor.

USD169.50

incl. VAT / 1pcs

Lowest price in 30 days before discount: / pcs

Regular price: / pcs

Cena sugerowana:

You can buy for pts.

Notify about availability

Contact the shop staff, in order to estimate time of preparing this product for shipment.

Shipment

Cheap and fast delivery

14 days for easy returns

Safe shopping

Deferred Payments. Buy now, pay later, if you don't return it

Buy now, pay later - 4 steps

When choosing a payment method, select PayPo. PayPo - buy now, pay later

PayPo will pay your bill in the store.
On the PayPo website, verify your information and enter your social security number.

After receiving your purchase, you decide what suits you and what doesn't. You can return part or all of your order - then the amount payable to PayPo will also be reduced.

Within 30 days of purchase, you pay PayPo for your purchases at no additional cost. If you wish, you spread your payment over installments.

After purchase you will receive pts.

Monochrome TORP display with buttons built into the housing

OFFICIAL TORP DISTRIBUTOR

TORP monochrome display

40 × 20 mm · buttons in the housing · generation 1.X controllers

The smallest TORP display: a 40 × 20 mm housing with buttons built into the body, mounted right next to the grip. It shows controller data, speed and battery state, so your phone stays in your pocket. It takes up almost no bar space and does not block your view.

This is the version for TORP TC500 1.X and TC1000 1.X controllers. For 2.X generation controllers — the ones we sell today — you need the Full-Color display; this model will not run them.

Mono or Full-Color?

	Mono (this one)	Full-Color
Controllers	TC500 1.X and TC1000 1.X only	TC500 and TC1000 1.X and 2.X
Screen	monochrome	2" IPS, colour, 170° angle
Controls	buttons in the housing	separate handlebar button
Dimensions	40 × 20 mm	85 × 65 × 60 mm
Ingress rating	not stated by the manufacturer	IP65
Data port	not stated by the manufacturer	Bluetooth / CAN

This display only makes sense on a generation 1.X controller. If you run or plan a 2.X controller, take the Full-Color — mono will not work with it. Check your generation before ordering; if you are not sure, message us.

What you get

Display

With buttons built into the housing

Hex key

Included for the install

Direct connection

Plugs into the TORP controller loom

Warranty

Manufacturer warranty plus 2-year EU statutory rights

What is not included

The wiring loom. If your Sur-Ron Light Bee or Ultra Bee runs a controller with a 3-connector harness, you need the 5-connector loom — without it the display will not connect. This does not apply to Talaria MX3 / MX4 owners.

The 40 × 20 mm housing with its buttons — it sits right beside the grip.

TORP Full-Color display next to the monochrome version

For comparison, the Full-Color version: bigger, colour, separate button — and the only one that will run a 2.X controller.

Manufacturer specification

Dimensions	40 × 20 mm
Controls	buttons built into the housing
Compatibility	TC500 1.X, TC1000 1.X
Connection	straight into the TORP controller loom
In the box	display, hex key

That is everything the manufacturer publishes about this model. Screen type, viewing angle, brightness, ingress rating, operating temperature and data port are not stated — so we do not invent them either. The Full-Color version has a full specification.

Sur-Ron Light BeeSur-Ron Ultra BeeTalaria MX3 / MX4TC500 1.XTC1000 1.X

Before you order

Check your controller generation — 1.X or 2.X. That is the single most important question with this product.
Count the connectors on the controller harness: 3 connectors means you need the 5-connector loom.
Reverse and Daily mode work on Sur-Ron Light Bee and Talaria MX3 / MX4.
If you are planning to move to a 2.X controller, buy the Full-Color straight away — mono will not carry over.

Frequently asked questions

Will it work with my TC500 2.X?

No. The manufacturer lists this model as compatible with TC500 1.X and TC1000 1.X only. The 2.X generation needs the Full-Color display.

How do I check which generation I have?

The generation is marked on the controller and shows in the TORP app once you connect over Bluetooth. If you are unsure, send us a photo of your controller and we will confirm.

How is it different from the Full-Color?

This model is smaller, has a monochrome screen and buttons in the housing. The Full-Color has a 2" IPS colour screen, a separate handlebar button, IP65 and also supports 2.X controllers.

Do I need to buy a loom?

Only if your Sur-Ron Light Bee or Ultra Bee has a controller with a 3-connector harness. Then you need the 5-connector loom.

Worth a look

TORP Full-Color display

A 2" IPS colour screen and the only option if you run a 2.X generation controller.

Wiring loom for TC500 and TORP Display

The part without which the display will not connect to an older harness.

TORP TC500 2.X controller – Light Bee

Planning to move to 2.X? Remember you will then need the Full-Color display.

Running a 1.X controller? This display is for you

Add it to your cart. Fast European delivery.

Do you need help? Do you have any questions?Ask a question and we'll respond promptly, publishing the most interesting questions and answers for others.

Ask a question

Write your opinion