Aluminum Kickstand Extension (+3 cm) – Dedicated to 96 POWER PARTS Kickstands – Surron Ultra / Light Bee
Aluminum Kickstand Extension (+3 cm) – Dedicated to 96 POWER PARTS Kickstands – Surron Ultra / Light Bee
- Aluminium +3 cm extension for 96 Power Parts kickstands. Adds 30 mm once the stand adjustment has run out. Sur-Ron Light Bee and Ultra Bee.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
You already run a 96 Power Parts kickstand, but after bigger wheels or a heavily raised suspension the bike still leans too far? The adjustment range has an end. This aluminium extension adds another 3 cm to the stand and brings the parking angle back — without replacing the whole kickstand.
What you get
+3 cm beyond the adjustment range
You add 30 mm where the stand adjustment already ran out. The answer for heavily raised bikes.
Purpose-built
Designed for 96 Power Parts kickstands — not a universal spacer picked by eye.
Aluminium
Light and rigid. It does not add weight where the bike is already tall.
The bike stands safer
Less lean means less risk of it going over in a car park or on soft ground.
Fits in minutes
It threads in between the stand and its foot. No cutting, welding or fabricating.
Specification
| Model | 96 Power Parts kickstand extension |
| Added length | +3 cm (30 mm) |
| Material | aluminium |
| Designed for | 96 Power Parts kickstands |
| Fitting | between the stand and its foot, no modification |
| Manufacturer | 96 Power Parts — in-house production |
For 96 kickstands on
Sur-Ron Light BeeSur-Ron Ultra Bee
Important before you buy
This is an add-on for a 96 Power Parts kickstand, not a stand on its own. If you are still on the factory stand, start with the adjustable one: Light Bee / Talaria / Segway version or Ultra Bee version.
Questions people actually ask
Does this replace the kickstand?
No. It is an extension that adds 3 cm to the 96 Power Parts stand you already have. Without that stand there is nothing to extend.
When do I need it?
When you have used up the full 265–350 mm adjustment of the stand and the bike still stands too leaned over. Typically after 18/21 wheels plus raised suspension.
Do I need special tools?
No. It threads in between the stand and its foot, with standard spanners.
Will aluminium take the bike weight?
Yes. The part works in compression rather than bending, and aluminium is more than adequate in that direction.
Does it fit the factory Sur-Ron stand?
No. It is made specifically for 96 Power Parts kickstands.
Do it properly — add to the set
96 adjustable kickstand — Light Bee / Talaria / Segway
265–350 mm of adjustment. The base this extension is made for.
96 adjustable kickstand — Ultra Bee
The same for the Ultra Bee: 265–350 mm plus this extension.
96 reinforced footpeg mount
Has a dedicated hole for the stand — a strong base for the whole setup.
A 96 Power Parts product
Our own part, machined and finished in-house, fast shipping across Europe. Not sure it fits your stand? Message us — we ride these bikes ourselves.
Goes well with
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5