D.I.D 428NZ G&B Gold Chain, 110 Links, Non-O-Ring – Talaria MX5 (Sting R PRO)
New in
D.I.D 428NZ G&B Gold Chain, 110 Links, Non-O-Ring – Talaria MX5 (Sting R PRO)
- D.I.D 428NZ G&B chain, gold and black, non-O-ring, 110 links — for the Talaria MX5 (Sting R PRO) with a 52T rear sprocket. SDH pins, clip master link included. Length chart for 44T, 48T and 52T below.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
The Talaria MX5 runs a 428 chain — heavier-duty than the 420 on the Sur-Ron Light Bee or the Talaria MX3/MX4. Stock gearing is a 13T front sprocket, 48T rear and a 108-link chain. An electric motor delivers full torque from zero, so the chain takes a hit every time you twist the throttle. This is not the place for a random chain.
D.I.D 428NZ is the Super Non-O-Ring series: SDH-hardened pins, quad-staked, solid bushings. No O-rings means less drag than a sealed chain — and on an electric bike every watt at the wheel is range. This listing is the 110-link version, matched to a 52T rear sprocket.
Which sprocket — which chain (Talaria MX5)
| Rear sprocket | Chain | What it does |
|---|---|---|
| 44T — 96 sprocket | 106 links | taller gearing, higher top speed |
| 48T — stock / 96 sprocket | 108 links | Talaria stock gearing |
| 52T — 96 sprocket | 110 links ← this listing | shorter gearing, harder pull off the bottom |
Lengths apply to the stock 13T front sprocket, stock swingarm and wheelbase. Calculated with the chain-length formula from the stock 13T/48T/108 setup and consistent with recommendations from Talaria parts distributors in the EU. Running a different swingarm or front sprocket? Count the links on your current chain or message us — we will confirm the length.
SDH pins
Hardened pin surface — less stretch, longer service life.
Non-O-ring
Lower rolling resistance than a sealed chain — more power to the wheel.
Clip link included
Ships open; join it with the clip link, no riveting tool needed.
Replacing the chain? Replace the sprockets too
Specifications
| Model | D.I.D 428NZ G&B (Super Non-O-Ring) |
| Pitch | 428 |
| Length | 110 links |
| For rear sprocket | 52T (13T front) |
| Tensile strength | avg. 25.5 kN (5,740 lbs) — D.I.D data |
| Weight | approx. 1.0 kg per 100 links |
| Pins | SDH-hardened, quad-staked |
| Bushings | solid |
| Plates | 2.0 mm |
| O-rings | none |
| Colour | gold outer plates, black inner plates |
| Supplied | open, clip-type master link included |
| Fits | Talaria MX5 (Sting R PRO), incl. L1e version |
Strength and weight figures as published by the chain manufacturer.
In the box
- D.I.D 428NZ G&B chain, 110 links, open
- clip-type master link
Not in the box
- sprockets — stock 13T front stays, 96 rear sprockets 44T/48T/52T sold separately
- chain lube
Before you order
- Check your rear sprocket — the tooth count is stamped on it. Pick the chain length from the chart.
- Changing the sprocket? Buy the chain for the new sprocket, not the old one.
- Fit the clip with its closed end facing the direction of chain travel.
- Check tension after the first 50–100 km — a new chain beds in.
FAQ
Is this a chain for the MX3/MX4?
No. The MX3 and MX4 use a 420 chain. This 428 chain fits the Talaria MX5 (Sting R PRO).
How many links does the stock MX5 chain have?
108 links with 13T/48T gearing.
Can I shorten the chain?
Yes, the chain is open. Shorten it with a chain breaker and join it with the included clip link. Easier still: order the right length from the chart.
Why non-O-ring?
A non-O-ring chain has less drag. Off-road it needs regular cleaning and lubing — in return it puts more power to the wheel.
Talaria MX5Sting R PRO428 chain110 linksnon-O-ringD.I.D
Warehouse and service in the European Union. Match the chain to your sprocket using the chart and add it to your cart.
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5