Sur-Ron Light Bee X / L1E 2018–2025

Aluminium footrest mounting spacer for Sur-Ron Light Bee X/L1E and Segway X260 and 79Bike Falcon Pro. Reinforces and stiffens the peg mounting points and prevents cracking. Bolt-on kit, mounting screws included.

96 reinforced footpeg mount with brace, 7075 aluminium, black anodised. Three peg positions and a kickstand hole. Sur-Ron Light Bee, Segway X260.

17″ supermoto wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Lower centre of gravity and sharper turn-in on tarmac than the stock off-road setup.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Version with threaded slider mounts. Fits Sur-Ron Light Bee.

A set of two 96 Power Parts chain adjuster blocks, CNC-machined from anodised aluminium. They replace the stock ones cast from cheap alloy. Easier chain adjustment and no rubbing on the frame. Fits Sur-Ron Light Bee / Segway X260.

18″/21″ off-road wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. Full-size enduro geometry — more ground clearance and far more stability at speed than the stock wheels.

CNC rear brake disc guard for the Sur-Ron Light Bee and Segway X260, black, v1. Takes the hits from rocks and roots that would otherwise bend the disc. Bolt-on, no modification.

Rear brake disc 200 mm for Sur-Ron Light Bee and E-Ride Pro SS 2.0 — 25% thicker than OEM (2.3 vs 1.9 mm). More heat capacity, consistent braking, far less warping. Direct bolt-on with the stock caliper. Fast EU shipping.

12″ supermoto wheelset built to order for Sur-Ron LBX/L1E, Talaria Sting MX3/MX4, 79Bike Falcon PRO and E-Ride Pro SS 2.0. The smallest setup we build — lowest centre of gravity and the fastest steering, made for stunt and tight tarmac.

Custom 16″ OFF-ROAD rear wheel — pick rim, spoke, nipple and hub colours. Sur-Ron LBX/L1E, Talaria Sting MX3/MX4 (adapter included), 79Bike Falcon Pro, E-Ride Pro SS 2.0. Configured tyre arrives mounted with inner tube.

OFF-ROAD 16″ rear wheel for Sur-Ron Light Bee, E-Ride Pro SS 2.0/2.5 (up to 2025), Talaria Sting MX3/MX4 and 79Bike Falcon Pro. CNC 7075 hubs, stainless spokes. Configured tyre arrives mounted with inner tube.

FASTACE ALX13RC 2.0 fork, 60 lbs version. 37 mm stanchions, 200 mm travel, open bath damping, compression and rebound adjustment. Sur-Ron Light Bee X, L1E, Talaria.

Reinforced 21″ front OFF-ROAD wheel for Sur-Ron Light Bee, E-Ride Pro SS, Talaria Sting and 79Bike Falcon Pro. Black 21″×1.6″ rim, CNC 7075 hub, 10g stainless spokes. Configured tyre arrives mounted with inner tube. Fast EU shipping.

Stainless steel rear wheel spacers for the Sur-Ron Light Bee and Segway X260. Made to factory dimensions. Harder than aluminium and equally rust-free — the cheapest route to spacers that still come off the axle in two years.

v2 CNC aluminium footpegs for Sur-Ron Light Bee and Segway X260. Wider than stock, spikes machined into the aluminium body, black anodised. Bolt-on fit, supplied as a pair.

Carbon-look battery cover for the Sur-Ron Light Bee / Segway X260. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Carbon-look ignition cover for the Sur-Ron Light Bee. Stated plainly: this is a carbon pattern on plastic, not real carbon — it changes the look, not the strength. Mounts on the factory points, no modification.

Perfect solution for night riding, early morning journeys through fog, or navigating environments with low light conditions.

Headlight cut-off switch for the Sur-Ron Light Bee X. Turn the lights off in daylight and stop giving range away for nothing. Waterproof construction. Note: the LBX and L1E versions use different plugs and are not interchangeable — order for your model.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour blue. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour red. Footpegs are not included.

CNC-machined 6061 aluminium adapters that move the footpegs 25 mm lower. More legroom when standing and a lower centre of gravity. Bolt-on fitting, mounting bolts included, no frame modification. Colour silver. Footpegs are not included.

Complete drive shaft assembly with 14T sprocket and belt pulley (v2) for Sur-Ron Light Bee. 14T is the stock size, so gearing stays factory. Shaft, sprocket and pulley in one part. Fast European delivery.

Stop harder, lap after lap. Ceramic-compound pads that shrug off heat, kill brake fade and outlast stock — less dust, quieter braking. Fits Sur-Ron Light Bee, 79Bike Falcon/Falcon Pro & E-Ride Pro SS 2.0. Direct bolt-on, shipped fast from the EU.