Reinforced extended 96 Power Parts Swingarm for Sur-Ron Light Bee X/S/L1e and Segway X260, Black/Brown
- Reinforced, extended 96 Power Parts swingarm, black-bronze. CNC 6061-T6, 525 mm (+45 mm), 3.7 kg, bolted design — belt fits without cutting. Stunt pegs included. Light Bee, Segway X260.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
Reinforced, extended 96 Power Parts swingarm, CNC-machined from 6061-T6 billet. 45 mm longer than stock, bolted instead of welded, stunt pegs included. Fits the Sur-Ron Light Bee X / S / L1e and the Segway X260. Does not fit the 79Bike Falcon.
What you get out of it
+45 mm of wheelbase settles the bike at speed and over jumps.
Bolted, not welded — a belt drive goes on without cutting the arm, and service or later upgrades stay simple.
No extra pegs to buy — the set ships with the swingarm.
Specification
| Material | 6061-T6, CNC-machined |
| Length | 525 mm (+45 mm over stock) |
| Weight | 3.7 kg (+1.5 kg over stock) |
| Finish | Anodised |
| Construction | Bolted — belt fits without cutting |
| Included | Stunt pegs |
| Colour | Black-bronze (96 signature) |
| Fits | Sur-Ron Light Bee X / S / L1e · Segway X260 |
| Brand | 96 Power Parts |
Fits straight away
Before you order
The swingarm is 45 mm longer, so the stock chain (106 links) will be too short — you need a 110-link chain. The right length from our range: D.I.D 420NZ3G-B, 110 links — order it together with the swingarm.
The chain tensioner is not included — the parts shown in some photos are sold separately.
79Bike Falcon — does not fit. This arm is built for the Light Bee and Segway X260.
Running a belt? Check your belt guide — the bolted design takes a belt without cutting the arm.
Frequently asked questions
Yes. Light Bee X, S and L1e share the same swingarm mount, and so does the Segway X260.
No. The stock chain has 106 links; the longer wheelbase needs 110. We recommend a new chain in the correct length rather than adding links to a used one.
Yes — that is the point of the bolted design. Unbolt the arm, fit the belt, bolt it back.
Yes, in our own workshop in the EU. Message us before ordering and we will book a slot.
Complete the build
Chain tensioner — not included with the swingarm
220 mm rear disc — for a full rear-end rebuild
The same swingarm in blackSend us a line about your setup and we will tell you exactly what the install needs.